meterdopa.blogg.se

1. PROTOOLS 12 CHANGE WAVE BOUNCE TO MP3 PORTABLE
2. PROTOOLS 12 CHANGE WAVE BOUNCE TO MP3 SOFTWARE
3. PROTOOLS 12 CHANGE WAVE BOUNCE TO MP3 PROFESSIONAL
4. PROTOOLS 12 CHANGE WAVE BOUNCE TO MP3 DOWNLOAD

Then use the Source 1 and Source 2 knobs to fine tune the audio input levels. Note – You should first adjust the audio output level from the minidisc to change the volume of the audio going into the computer. Turn the knob clockwise to increase the volume of the inputted audio and counter-clockwise to decrease the volume. Use the Source 2 knob to adjust the volume of the right channel of audio (in the case of mono audio from a minidisc recorder, the Source 2 knob will control the audio from even numbered tracks). Use the Source 1 knob to adjust the volume of the left channel of audio (in the case of mono audio from a minidisc recorder, the Source 1 knob will control the audio from odd numbered tracks). The knobs in the Source 1 and 2 areas on the front of the Mbox adjust the volume levels of the audio going in to the computer from the minidisc recorder. Repeat this for the Source 2 area just below, pressing the small button and switching the input mode to Line. Press the small button and switch the input mode to Line setting. Locate the area at the top labeled Source 1, which has small button with a light just to the right of it. (Tip: In the audio world RED is always the RIGHT channel, which is expressed as an EVEN number).Īt the top of the back of the Mbox, make sure the tiny button labeled 48V is not pressed in (the 48V setting is for providing power to some microphones). You’ll need two 1/4 inch to RCA audio adapters, as depicted above, to plug your RCA audio prongs into the Mbox’s two Source plugs.Ĭonnect the black prong on the RCA audio cable to the Source 1 socket.Ĭonnect the red prong on the RCA audio cable to the Source 2 socket. The two RCA audio male jacks on the other end of the cable connect to the Source plugs on the bottom back of the Mbox.

You connect the 1/8 inch minijack end of the cable to the “headphones” or “audio out” plug on the minidisc recorder. To connect the Mbox to a minidisc recorder you need a 1/8 inch minijack to RCA audio cable (these cables usually come with the minidisc recorder). The Mbox is connected to the computer via a USB cable.Ĭonnecting an Mbox to a Minidisc Recorder You then open and edit the audio using the ProTools software.

PROTOOLS 12 CHANGE WAVE BOUNCE TO MP3 DOWNLOAD

The Mbox is a hardware device you use in conjunction with ProTools to download your audio from a minidisc recorder to your computer. This is the transport panel, and is designed like old analog equipment to allow you a familiar way to navigate through your audio piece. You’ll also see a box on the screen with buttons like you’d find on a cassette deck. To the right is the audio bin, which is where ProTools stores the raw audio files you’ve imported from a minidisc recorder, a CD, etc. You can use the timeline to keep track of the overall length of your project or to know where you are at any given time in an audio piece. With ProTools you can lay down many tracks, which you can then mix and fade between to produce your audio piece.Īt the top of the screen is a timeline. The open space in the middle of the screen is for laying audio tracks. The main ProTools screen is divided into several sections. ProTools allows you to go back multiple steps and undo them. If you make a mistake, you can undo it by selecting Edit…Undo (or use the Apple shortcut for undoing – Cmd-Z). Then click on the Save button to save your work.Īnd keep saving regularly by clicking on File…Save (or use the Apple shortcut for saving – Cmd-S), so you don’t lose any of your work if the computer crashes.

PROTOOLS 12 CHANGE WAVE BOUNCE TO MP3 PORTABLE

Type in a name for your project and choose the location on your computer where you want to store your audio files (such as on a portable firewire drive). Create a new session by selecting in the menu at the top:Ī new dialog box will pop up that looks like this:

PROTOOLS 12 CHANGE WAVE BOUNCE TO MP3 SOFTWARE

This tutorial is written for the ProTools version used on Apple computers, but the Windows version of the software is very similar. ProTools has versions for both the Apple and Windows platforms. ProTools software comes paired with an Mbox, which is a separate hardware unit made by Digidesign that connects the source of your sound (like a minidisc player, microphone or DAT player) to your computer. Although it’s used by top-notch pros in the radio industry, ProTools has a fairly easy learning curve, making it just as good for beginners.

PROTOOLS 12 CHANGE WAVE BOUNCE TO MP3 PROFESSIONAL

ProTools is a professional audio engineering software program made by Digidesign.